{"product_id":"newmar-12-12-35i-dc-converter-12-12-35i","title":"Newmar 12-12-35I DC Converter [12-12-35I]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e12-12-35I DC Converter\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis isolated series provides voltage conversion as well as input\/output isolation, allowing the use of negative ground gear in positive or floating ground battery systems, or vice versa. \u003c\/p\u003e\u003cp\u003eUsing an isolated converter as a voltage stabilizer on 12- or 24-volt systems can solve conducted noise and interference problems on sensitive DC-powered communication, navigation systems, and DC microprocessor-based devices.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWide range of input voltage\u003c\/li\u003e\n\u003cli\u003ePrecise output voltage regulation\u003c\/li\u003e\n\u003cli\u003eReverse polarity\u003c\/li\u003e\n\u003cli\u003eInput fuse\/output fuse\u003c\/li\u003e\n\u003cli\u003eTotal input\/output isolation, pos. or neg. ground\u003c\/li\u003e\n\u003cli\u003eCurrent-limiting, short-circuit-proof output\u003c\/li\u003e\n\u003cli\u003eAutomatic resetting of the thermal shutdown\u003c\/li\u003e\n\u003cli\u003eHigh\/low input voltage shutdown\u003c\/li\u003e\n\u003cli\u003ePolyurethane conformal coating on PC board\u003c\/li\u003e\n\u003cli\u003ePower ON light\u003c\/li\u003e\n\u003cli\u003eRugged case designed for high-vibration applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInput Voltage: 10-16\u003c\/li\u003e\n\u003cli\u003eMax Input Amps: 56\u003c\/li\u003e\n\u003cli\u003eOutput Voltage: 13.6\u003c\/li\u003e\n\u003cli\u003eOutput Amps (Intermittent): 35\u003c\/li\u003e\n\u003cli\u003eOutput Amps (Continuous): 20\u003c\/li\u003e\n\u003cli\u003eCase Size (H x W x D): 6 x 6.8 x 16.5 inches (15.2 x 17.3 x 41.9 centimeters)\u003c\/li\u003e\n\u003cli\u003eWeight: 12 lb. (5.5 kg)\u003c\/li\u003e\n\u003cli\u003eOutput: 13.6 VDC (internally adjustable 12.6 -14.5) or 24.5 VDC (or specify)\u003c\/li\u003e\n\u003cli\u003eRipple: 150 mV P-P maximum\u003c\/li\u003e\n\u003cli\u003eRegulation: 1% Line\/Load\u003c\/li\u003e\n\u003cli\u003eDuty Cycle Ratings: Intermittent – 20 minutes max on time, 20% duty. current limit set at approx. 105% of the intermittent rating. Continuous – 24 hours, 100% duty\u003c\/li\u003e\n\u003cli\u003eIdle Current: Less than 100 mA (including power “ON” light )\u003c\/li\u003e\n\u003cli\u003eOperating Temp: 0-50 degrees C, Derate Linearly From 100% @ 40 degrees C To 50% @ 50 degrees C. Thermal shutdown @ 70 degrees C Case Temperature\u003c\/li\u003e\n\u003cli\u003eSwitching Frequency: 40 kHz\u003c\/li\u003e\n\u003cli\u003eEfficiency: 85% – Typical\u003c\/li\u003e\n\u003cli\u003eIsolation – Output\/Chassis; Input\/chassis: 250 VDC\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eMechanical Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAnodized aluminum heat sink case\u003c\/li\u003e\n\u003cli\u003eFront panel terminal block\u003c\/li\u003e\n\u003cli\u003eHeavy-duty mounting flange\u003c\/li\u003e\n\u003cli\u003econformal-coated PC board\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOperation as battery charger or parallel redundant operation* – derate to continuous duty rating (contact factory)\u003c\/li\u003e\n\u003cli\u003eExtreme vibration mounting kit. (Information below)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOption: Extreme Vibration Mounting Kit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Extreme Vibration Mounting Kit is available to protect NEWMAR power converters from the extreme stresses of shock and vibration when mounted on high-vibration vehicles.\u003c\/p\u003e\u003cp\u003eThe kit replaces the standard vibration kit provided with the unit and fits into the unit’s mounting flange to act as a ‘super shock absorber’ for electronics in high-vibration applications. It is available to fit all NEWMAR units from 2 to 70 lbs. Specify Kit L for units that weigh 2 -15 lbs. and Kit H for units that weigh 16 – 70 lbs.\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003c!--- cis2:m2lonZVl ---\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":47519208735040,"sku":"CWR-102293","price":2247.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0827\/9251\/3856\/files\/102293XL.jpg?v=1703054383","url":"https:\/\/firststopmarine.com\/products\/newmar-12-12-35i-dc-converter-12-12-35i","provider":"First Stop Marine","version":"1.0","type":"link"}